ECLER BIO-X8 VIVO extensie module

per stuk 8 Mic/Line inputs + 8 analoge outputs

ECLER BIO-X8 VIVO extensie module
ECLER BIO-X8 VIVO extensie module
ECLER BIO-X8 VIVO extensie module
Prijs op aanvraag
Artikelcode:  10-01284
0 ster(ren) met 0 review(s) Schrijf een review
De Ecler BIO-X8 is een uitbreidingsmodule voor de Ecler VIVO-X serie audiomatix. De BIO-X8 breidt het systeem uit met 8 extra analoge in- en uitgangen. De BIO-X8 kan met gemak worden gekoppeld aan een VIVO-X host unit doormiddel van de meegeleverde USB-C kabel.
Neem contact op voor de levertijd.
ECLER BIO-X8 VIVO extensie module

De Ecler PLEX-systemen bieden zeer uitgebreide en geavanceerde mogelijkheden. Om de kwaliteit en juiste toepassing te waarborgen, is het volgen van een training en behalen van een certificering verplicht. Zonder certificering is aankoop van Ecler PLEX-producten niet mogelijk. Neem contact met ons op voor meer informatie over de certificeringstrajecten.

Specificaties:
  • EclerPLEX audio I/O & control expansion unit, compatible with VIVO host units.
  • Connection via X-link to the VIVO host unit (1m Ecler certified X-link cable included).
  • Expansion features (added to the host VIVO unit ones):
    • 8 MIC / LINE analogue audio inputs ports (+48V Phantom selectable per port).
    • 8 LINE analogue audio output ports.
  • A maximum of 2x BIO-X8 units can be connected to a single VIVO-X8 Series unit host unit, using its 2x X-link expansion ports
  • Sampling rate: 48 kHz
  • Resolution: 32 bit
  • Latency: 3.87 ms
  • Frequency response: 10 Hz to 20 kHz (-0.5 dB)
  • Dynamic Range: ADC: 115 dB, DAC: 115 dB
  • Number of input ports: 8, MIC / LINE Level
  • Connection type: Euroblock, 3-pin, balanced
  • Input sensitivity:
    • -32,5 dBV to +18,5 dBV
    • -30,3 dBu to +20,7 dBu
  • Input impedance: 8kΩ (balanced), 4kΩ (unbalanced)
  • Max input level: 18,5 dBV / 20,7dBu
  • Mic preamp EIN
    • <-129,5 dBV
    • <-127,3 dBu
  • Dynamic range
    • Gain 0 dB: >110,2 dB
    • Gain 21 dB: >109,5 dB
    • Gain 42 dB: >105,5 dB
    • Gain 51 dB: >99,5 dB
  • THD + Noise
    • Gain 0 dB & Vin 0 dBV: 0,0025%
    • Gain 21 dB & Vin -21 dBV: 0,0026%
    • Gain 42 dB & Vin -42 dBV: 0,0044%
    • Gain 51 dB & Vin -51 dBV: 0,0085%
    • Gain 0 dB & Vin +17 dBV: 0,0010%
    • Gain 21 dB & Vin -4 dBV: 0,0015%
    • Gain 42 dB & Vin -25 dBV: 0,0010%
    • Gain 51 dB & Vin -34 dBV: 0,0015%
  • CMRR
    • >70dB typ (1kHz)
    • >60 dB typ (20 Hz - 20kHz)
  • Phantom power: +48VDC, 10mA per input max
  • Number of output ports: 8, LINE leve
  • Connection type: Euroblock, 3-pin, balanced
  • Max output level: 18,5dBV / 20,7dBu
  • Output impedance: 300Ω (balanced), 150Ω (unbalanced)
  • Dynamic range: > 112,5 dB
  • Crosstalk: > 95dB
  • X-LINK: 1, X-LINK port. USB-C connector
  • Power supply: Internal, Universal, regulated switching mode supply
  • AC mains requirement: 100-240 VAC @ 47-63 Hz
  • AC mains connector: IEC C14 inlet
  • Power consumption:
    • <13W Standard, <15W Typ, <18,5W Max
    • <26VA Standard, <30,5VA Typ, <36,5VA Max
  • Heat load: < 54.6 BTU/h Typ, <68.2 BTU/h Max
  • Ventilation: FAN
  • Operating temperature
    • Min: 0°C / 32°F
    • Max: 50°C / 122°F
  • Operating humidity: 5 - 85% RH, non-condensing
  • Storage temperature:
    • Min: 0°C / 32°F
    • Max: 50°C / 122°F
  • Storage humidity: 5 - 85% RH, non-condensing
  • Installation options: Desktop, 19" racks (1RU)
  • Included accessories:
    • 1x EU Mains cord, 1x Multiplug Mains cord, 4x Washers, 4x Rubber feet, 1x USB-C Ecler X-Link certified cable, 8x Euroblock connectors (green colour), 8x Euroblock connectors (blue colour), 1x USB holder, 1x Screw
  • Dimensions (WxHxD): 482.4 x 44 x 214 mm / 18.99 x 1.73 x 8.43 in
  • Weight: 3 Kg / 6.61 lb.

© Smitsound Geluidstechniek

Reviews

Er zijn geen reviews beschikbaar in de huidige taal
Schrijf een review